Medical Grade Woman Chest Pad Making Addition Cure Liquid Silicone Rubber

• Customization: Available
• Material: Organic Silicone
• Application: Medical, Industrial
• Model NO.: INI-Y series
• Certification: ISO, FDA, REACH, RoHS
• Usage: Lifecasting
• Mode Item: Ini-Y805
• Color: Human Skin Color
• Hardness: 5 Shore a
• Mix Ratio: 1:1
• Shrinkage Rate: Less Than 0.1%
• Elongation: 900%
• Tear Strength (Kn/M): 8
• Tensile Strength (MPa): 2.3
• Operate Time: 10-20 Minutes
• Curing Time: 1-2 Hours
• Curing Temperature: 25c
• Viscosity: 16000 Cps
• Grade: Food and Medical
• MOQ: 200kgs
• Transport Package: 25kg
• Specification: drum
• Trademark: INIBABA
• Origin: Shenzhen, China
• HS Code: 39100000
• Production Capacity: 800 Tons Per Year
• Package Size: 90.00cm * 90.00cm * 90.00cm
• Package Gross Weight: 20.000kg
• Lead Time: 3 days (1 - 200 kg) ; 5 days (201 - 500 kg) ; 7 days (501 - 1000 kg) ; To be negotiated ( > 1000 kg)

Product Description

Mold Making Silicone

INI-Y805

Description  
Two-component silicone, platinum-curing/ addition-cure type, flowable, vulcanizes at room temperature or heated temperature. 
Can be used for a long time in the temperature range of - 65 ° C - 200 ° C and keep its soft and elastic properties. 

Application
Suitable for life casting for making mask, skin effects or silicone life in movie&TV for special effect. 
Also a perfect mold making material for brushable molding method for products in production industry.







Features & Advantages

• Food grade, FDA
• Low shrinkage
• Low viscosity
• Anti-deformation

• High temperature resistance
• Not oily
• No bubbles

• Excellent flow leveling which will copy finest details and patterns from exquisite products.

• Durable with excellent tear and tensile strength, guarantee molding times
• Easily demolding
• Resist aging, acid, alkali, corrosion and weather aging

 

Typical properties INI-Y805
 

Properties Index		Test Report
Before Curing	Appearance	Fluid
	Viscosity(cps)	16000±1000 (Adjustable)
Operating	Mixing Ratio(By weight)	1 :1
	Operating Time(min/25ºC  )	10~30  (Adjustable)
	Curing time (min/25ºC)	40~120 (Adjustable)
After Curing	Hardness (shore A)	5±2
	Tear strength (kN/m)	7.5±2
	Tensile strength (Mpa)	2.1±1
	Shrinkage (%)	≤0.1
	Elongation (%)	950~1000
	Density (g/cm)	1.03

 Notes: Above data are only reference values, actual data is floating and adjustable.

Operation instructions

1. Mix part A and pars B evenly with 1:1 mixing ratio.

Notes: 1) Weigh the two parts exactly by electronic weight. For example, the operation time will be shorten after adding too much catalyst.

1. Mix part A and part B evenly. Otherwise the silicon rubber will be partly solidified which will make the finished molds meet a short life and waste silicon rubber.

 

    2. Vacuum pumping

Notes: 1) This step is not have to have, but it is best if there is one. It will discharge all air in the mixture successfully, so as to ensure that there
will be no bubbles in the finished mold.

2) This step is less than 10 minutes. Otherwise, it will cause cross-linking reaction, and no more further steps will be available. 
 

1. Pouring casting

Notes: We suggest to set the mold for another 12 hours after demould before put it into large production.




Handing and Storage

1. Precautions for safe handling:

Protective measures: Training should be provided to anyone working with or near this material. Training should cover potential health effects and proper handling techniques. Avoid contact with eyes, skin and clothing. Avoid ingestion and inhalation.

Measures to prevent fire: Ensure good local exhaust ventilation. Keep container away from any sources of ignition or heat (e.g. open flames, hot surfaces). The work area should be equipped with the corresponding species and quantity of emergency equipment, spills emergency treatment equipment and appropriate storage material.

Measures to prevent aerosol and dust generation: Ensure good local exhaust ventilation.

Measure to protect the environment: Do not allow this products to be released to the environment without proper treatment.

Advice on general occupational hygiene: Eating, drinking and smoking should be prohibited in areas where this material is handled, stored and processed.

 

1. Conditions for safe storage, including any incompatibilities:

Technical measures and storage conditions: Store in a cool, dry, well-ventilated area away from 
incompatible substances, feedstuffs, beverages and foods. Keep away from heat, sparks and flame. Treat carefully, avoid physical damage to containers. The storage area should be equipped with the corresponding species and quantity of emergency equipment, spills emergency treatment equipment and appropriate storage material.

Requirements for storage rooms and vessels: Keep container tightly sealed.

Package
5KG, 20KG, 25KG and 200KG per drum.
(There are metal drum and plastic drum for your choice for 5KG and 20KG)



Shelf life
Twelve(12) months when stored under dry and cool place by original package under 25ºC.