Electronic Sealing Potting Compound Insulation RTV2 Silicone Rubber

Product Details
Customization: Available
Material: Organic Silicone
Application: Industrial
Still deciding? Get samples of US$ 30/kg
Request Sample
Gold Member Since 2023

Suppliers with verified business licenses

Audited Supplier

Audited by an independent third-party inspection agency

  • Electronic Sealing Potting Compound Insulation RTV2 Silicone Rubber
  • Electronic Sealing Potting Compound Insulation RTV2 Silicone Rubber
  • Electronic Sealing Potting Compound Insulation RTV2 Silicone Rubber
  • Electronic Sealing Potting Compound Insulation RTV2 Silicone Rubber
  • Electronic Sealing Potting Compound Insulation RTV2 Silicone Rubber
  • Electronic Sealing Potting Compound Insulation RTV2 Silicone Rubber
Find Similar Products

Basic Info.

Model NO.
INI-93 Series
Use
Potting
Appearance
Liquid
Hardness
25 Shore a
Mix Ratio
1:1
Viscosity
550 Cps
Fire Resistance
UL94-V0
Mode
Ini-9325
Operate Time
30-50 Minutes
Curing Time
3-5 Hours
Volume Resistivity
0.2
Dielectric Strength
25
Certificates
FDA, MSDS, Reach, RoHS, ISO
Lead Time
3-5 Days After Payment Receiving.
Package
25kg/200kg
Shelf Life
12 Months
Transport Package
25kg/200kg
Trademark
INIBABA
Origin
Shenzhen, China
HS Code
39100000
Production Capacity
800 Tons Per Year

Product Description


 

Silicone Potting Compound
INI-9325

 

Description  
Two-component silicone, platinum-curing, flowable, vulcanizes at room temperature.
Can be used for a long time in the temperature range of - 65 ° C - 200 ° C and keep its soft and elastic properties.

Application
Used for potting, encapsulating, sealing and bonding, widely used in electronic products, electricity, power supply, automotive ect. For example, used for potting of electronic components, power module and control module and controllers, junction box, solar cell assembly etc..
Can reduce stress and withstand high and low temperature impact. For the high power control module, thermal conductive silicone is used to achieve the function of heat dissipation, or outdoor protection for electronics such as LED screen.
Improve the insulation level of electronics, improve heat dissipation, and avoid the risk of electronics overheating and burning in a short time.

Electronic Sealing Potting Compound Insulation RTV2 Silicone Rubber
Electronic Sealing Potting Compound Insulation RTV2 Silicone Rubber
Electronic Sealing Potting Compound Insulation RTV2 Silicone Rubber
Electronic Sealing Potting Compound Insulation RTV2 Silicone Rubber
Electronic Sealing Potting Compound Insulation RTV2 Silicone Rubber
Electronic Sealing Potting Compound Insulation RTV2 Silicone Rubber
Features & Advantages

  • High transparency
  • Low viscosity, excellent flow leveling
  • Food grade, FDA certificate
  • Better anti-corrosion
  • Better weather aging resistance
  • Better insulation
  • Fire proof, flame retardant
  • Waterproof, moisture proof
  • Anti-fouling
  • Quake-proof/ withstand vibration
  • Thermal conductive
  • Ozone resistance
  • Low shrinkage
  • Can be operated in all kinds of harsh environments (Moisture, salt fog, dust, vibration, heat, deep sea, cold, etc.).

Typical properties INI-9325
Properties Index Test Report
Before Curing Appearance Transparent fluid
Viscosity(cps) 550±100
Operating Mixing Ratio (By weight) 1 :1
Operating Time(25ºC  /min) 20~30 (Adjustable)
Curing time (hr, basically cured) 1~2  (Adjustable)
Curing time (hr, perfectly cured) 12
After Curing Hardness (shore A) 25±3
Thermal conductivity [W(m·K)] ≥0.2
Liner Conductivity [m/(m·K)] ≤2.2×10-4
Dielectric strength(kV/mm) ≥25
Dielectric permittivity(1.2MHz) 3.0~3.3
Volume resistivity(Ω·cm) ≥1.0×1016
Fire resistance UL94-V0
Density (g/cm) 1.08

Notes: Above data are only reference values, actual data is floating and adjustable.

 


Electronic Sealing Potting Compound Insulation RTV2 Silicone Rubber
Electronic Sealing Potting Compound Insulation RTV2 Silicone Rubber

Electronic Sealing Potting Compound Insulation RTV2 Silicone RubberElectronic Sealing Potting Compound Insulation RTV2 Silicone Rubber

Operation instructions

  1. Mix part A and pars B evenly with 100:3 mixing ratio.

Notes: 1) Weigh the two parts exactly by electronic weight. For example, the operation time will be shorten after adding too much catalyst.

 

           2)Mix part A and part B evenly. Otherwise the silicon rubber will be partly solidified which will make the finished molds meet a short life and waste silicon rubber.

 

         

       2.Vacuum pumping

 

Notes: 1) This step is not have to have, but it is best if there is one. It will discharge all air in the mixture successfully, so as to ensure that there

will be no bubbles in the finished mold.

 

          2) This step is less than 10 minutes. Otherwise, it Will cause cross-linking reaction, and no more further steps will be available.

 

 

     3.Pouring casting or Brush molding

 

Notes:1) For simple pattern products we suggest use pouring operation way, which will be very easy to operate and demould. Pourable silicone require low viscosity which will be easy to flow smoothly and easy to de-air.

 

           2)For delicate pattern products we suggest use brushing operation way, which can copy the pattern exactly. Brushable silicone require high viscosity which won't be easy to flow away and easy to brush.      

 

           3)We suggest to set the mold for another 12 hours after demould before put it into large production.

Electronic Sealing Potting Compound Insulation RTV2 Silicone Rubber


Package details:1kg/5kg/20kg/25kg/200kg
Electronic Sealing Potting Compound Insulation RTV2 Silicone Rubber

 

 

Send your message to this supplier

*From:
*To:
*Message:

Enter between 20 to 4,000 characters.

This is not what you are looking for? Post a Sourcing Request Now
Contact Supplier