| Material: | Organic Silicone |
|---|---|
| Application: | Industrial |
| Certification: | ISO, FDA, REACH, RoHS |
| Samples: |
All colors and specifications are adjustable
|
|---|
| Customization: |
|---|
|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
|---|
| Payment Method: |
|
|---|---|
| Initial Payment Full Payment |
| Currency: | US$ |
|---|
| Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
|---|
Suppliers with verified business licenses
Audited Supplier Mold Making Silicone
INI-625
Description
Two-component silicone, tin-curing, flowable, vulcanizes at room temperature.
Can be used for a long time in the temperature range of - 65 ° C - 200 ° C and keep its soft and elastic properties.
Application
General mold making.
Suitable for reproducing and replicating products in large quantity for industries: Art crafts, sculptures, furniture, architectural elements, garden ornaments, tire, soap, candle and so on. Used for making molds for variety of material, such as resin, PU, gypsum, plaster, concrete, cement, stone, GRC, PVC, polyester, wax, bronze and so on.
Features & Advantages
Low shrinkage
Anti-deformation
Not oily,
No bubbles
Excellent flow leveling which will copy finest details and patterns from exquisite products.
Durable with excellent tear and tensile strength, guarantee molding times
Easily demolding
Resist aging, acid, alkali, corrosion and weather aging
Thixotropic agent/ thickening agent is available for brushing molding method
Typical properties INI-625
|
Properties Index |
Test Report |
|
|
Before Curing |
Appearance |
White/ Translucent fluid |
|
Viscosity(cps) |
18000±2000 (Adjustable) |
|
|
Operating |
Mixing Ratio (By weight) |
100 :3 |
|
Operating Time(25ºC /min) |
30~50 (Adjustable) |
|
|
Curing time (hr, basically cured) |
3~5 (Adjustable) |
|
|
Curing time (hr, perfectly cured) |
12 |
|
|
After Curing |
Hardness (shore A) |
25±2 |
|
Tear strength (kN/m) |
26±5 |
|
|
Tensile strength (Mpa) |
4.2±0.5 |
|
|
Shrinkage (%) |
≤0.3 |
|
|
Elongation (%) |
455~520 |
|
|
Density (g/cm) |
1.08 |
|
Notes: Above data are only reference values, actual data is floating and adjustable.
Operation instructions
Mix part A and pars B evenly with 100:3 mixing ratio.
Notes: 1) Weigh the two parts exactly by electronic weight. For example, the operation time will be shorten after adding too much catalyst.
2)Mix part A and part B evenly. Otherwise the silicon rubber will be partly solidified which will make the finished molds meet a short life and waste silicon rubber.
2.Vacuum pumping
Notes: 1) This step is not have to have, but it is best if there is one. It will discharge all air in the mixture successfully, so as to ensure that there
will be no bubbles in the finished mold.
2) This step is less than 10 minutes. Otherwise, it Will cause cross-linking reaction, and no more further steps will be available.
3.Pouring casting or Brush molding
Notes:1) For simple pattern products we suggest use pouring operation way, which will be very easy to operate and demould. Pourable silicone require low viscosity which will be easy to flow smoothly and easy to de-air.
2)For delicate pattern products we suggest use brushing operation way, which can copy the pattern exactly. Brushable silicone require high viscosity which won't be easy to flow away and easy to brush.
3)We suggest to set the mold for another 12 hours after demould before put it into large production.
Package details:1kg/5kg/20kg/25kg/200kg
Features:
1.Almost no shrinkage
2.Good fluidity, operability and excellent operation
3.Good resistance to weather, temperature, aging, acid
4.Excellent tear strenght, comfortable duplcation times
5.High chemical resistance to aggressive components of some types of resins
6.Food grade silicone(environmental, odorless and nontoxic
7.High resistance to high temperature and aging(resist -60 to 250ºC)
Operate Process:
1. The surface of the original is clean and free.
2. Weight 100 Part A base and 3 part B in a clean container.
3. Stirring Part A base silicone before using thoroughly , as filler separation may occur upon prolonged storage.
4. Mixing Part A and Part B evenly until completely dispersed in the base.
5. Pouring the mixed base silicone and platinum curing agent as soon as possible onto the original
6. De-mold after 24 hours ,it is will improve the replicate times of silicone mold.
Note:It is strongly recommended that entrapped air be removed in a vacuum chamber, allowing the mix to completely expand and then collapse. After a further 1-2 min under vacuum, the mix should be inspected and can be used if free of air bubbles. A volume increase of 3-5 times will occur on vacuum de-airing the mixture. So a suitably large container should be chosen.
Our Company:
INIBABA is a silicone rubber manufacturer in China that has ability to manufacture electric power water proof polymer, rtv2 silicone rubber, liquid silicone rubber, silicone potting, silicone gel, sticky silicone, silicone glue, silicone elastomer, platinum cured silicone rubber , tin cured silicone rubber.
According to the wide application, we can provide electronic potting silicone, mold making silicone, food grade silicone, pad printing silicone, coating silicone for textile and fiberglass, special effects silicone, silicone for high-tech, medical silicone, silicone for making sex toys, shoe insoles, printing roller, silicone badge, silicone toys, tattoo practices skins, medical educational supplies, suture pad, scar treatment patch and so on.
With advanced the technology of silicone production and high tech equipment, the silicone rubber provided by INIBABA has excellent quality without shrinkage problem, oily problem and implete curing problem. Through the control of multiple processes, INIBABA silicone gel is more delicate, so it has higher tear resistance and tensile performance, and the molds and products are more flexible and durable.
WHY CHOOSE INIBABA:
1. As a manufacturer, after-sales service and technical support are guaranteed, once you meet problem during using silicone, INIBABA will provide effective solution in the first time.
2. One to one service, guaranteed to teach you how to use silicone. If you are a beginner in silicone application, INIBABA team will be at your service.
3. The quality of silicone products is leading the world level with advanced technology and 50 production processes for quality protection by supervised by professional doctoral team.
Fast delivery by 1-3 days, with many high-end equipment, the production capacity is several times than most of manufactures in the same industry.
Our Advantages:
1.high quality similarity to global big brand of Wacker, Dowcoring, Momentive, KCC, ACC
2.12 months shelf life
3.50-1000 duplication time decided by product sizes
4.silicone non toxic, environment friendly
5.fast delivery within 3-5 days
6.shipment by air/sea/road is available
7.24 hours after sales service
8.professional R&D team
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}